6ES7352-5AH11-0AE0 – SIMATIC S7-300

Thông số kỹ thuật: PLC S7-300 6ES7352-5AH11-0AE0

• Nhãn hiệu/Nhà sản xuất: Siemens
• Mã sản phẩm: 6ES7352-5AH11-0AE0
• Trọng lượng: 0.49
• Loại sản phẩm: High Speed Boolean Processor
• Điện áp nguồn: 24 V dc
• Number of digital inputs: 8
• Number of digital outputs: 8

SIMATIC S7-300, FM352-5 WITH SRC OUT, HIGH SPEED BOOLEAN PROCESSOR, FOR HIGH-SPEED LOGIC OPERATION 12 DI, 8 DO, 1 ENCODER INTERF. FOR RS422 INCR./SSI ENCODER

Toàn Phát đối tác phân phối độc quyền các thiết bị công nghiệp SIEMENS – 6ES7352-5AH11-0AE0 chính hãng đầy đủ hóa đơn chứng từ và nguồn gốc xuất sứ.
Tất cả sản phẩm của Toàn Phát được bảo hành 12 tháng.

Chính sách khi mua hàng SIMATIC S7-300

Chính sách bảo hành

Khi mua hàng tại TPNEWTECH, tất cả sản phẩm của chúng tôi được bảo hành 12 tháng. Luôn sẵn sàng hỗ trợ sửa chữa và bảo trì lắp đặt cho tất cả KH dù KH có mua nhiều hay mua ít.
Hỗ trợ sửa chữa tận nơi đối với KH ở khu vực nội thành TP.Hồ Chí Minh.
KH ở xa có thể gửi hàng thông qua các bên vận chuyển để được sửa chữa.

Chính sách vận chuyển

Tất cả KH khi mua hàng có địa chỉ nhận hàng ở khu vực TP.Hồ Chí Minh sẽ được miễn phí hoàn toàn chi phí giao hàng (thời gian giao hàng nội thành HCM từ 1-3 ngày làm việc).
Đối với các KH ngoại thành tùy vào số lượng đặt hàng lớn hay nhỏ chúng tôi sẽ linh động tối ưu chi phí giao hàng cho quý khách.

Hướng dẫn mua sản phẩm SIEMENS – 6ES7352-5AH11-0AE0

Để mua hàng quý khách có thể liên hệ với chúng tôi bằng cách gọi điện thoại hoặc Zalo

Hoặc gọi qua số điện thoại Hotline: (+84) 903 908 082

Thông tin kỹ thuật bổ sung 6ES7352-5AH11-0AE0

		SIMATIC S7-300, FM352-5 with PNP output, High Speed Boolean Processor, for high-speed linking, 12 DI, 8 DO, 1 encoder interface for RS422 incr./SSI encoder
Supply voltage
Load voltage L+
● Rated value (DC)		24 V
● permissible range, lower limit (DC)		20.4 V
● permissible range, upper limit (DC)		28.8 V
● Reverse polarity protection		Yes
Input current
from load voltage1L+, max.		150 mA; typ. 60 mA
from load voltage 2L+ (without load), max.		200 mA; typ. 60 mA, DI/DO supply
from load voltage 3L+ (with encoder), max.		600 mA; typ. 80 mA plus encoder supply
from load voltage 3L+ (without load), max.		200 mA; typ. 80 mA
from backplane bus 5 V DC, typ.		135 mA
Encoder supply
5 V encoder supply
● 5 V		Yes
● Short-circuit protection		Yes; Electronic overload protection; no protection on applying a normal or counter voltage.
● Output current, max.		250 mA
24 V encoder supply
● 24 V		Yes
● Short-circuit protection		Yes; Overvoltage and overheating protection if overloaded; diagnostics if output reaches temperature limit; no protection on applying a normal or counter voltage
● Output current, max.		400 mA
Power loss
Power loss, typ.		6.5 W
Memory
Type of memory		RAM
Memory size		128 kbyte; required for operation, MMC
Digital inputs
Number of digital inputs		8; Standard and up to 12 with 24 V DC encoder inputs as digital inputs
Input voltage
● Rated value (DC)		24 V
● for signal “0”		-30 to +5 V
● for signal “1”		+11 to +30V
Input current
● for signal “0”, max. (permissible quiescent current)		1.5 mA
● for signal “1”, typ.		3.8 mA
Input delay (for rated value of input voltage)
● Input frequency (with a time delay of 0.1 ms), max.		200 kHz
● programmable digital filter delay		None, 5 µs, 10 µs, 15 µs, 20 µs, 50 µs, 1.6 ms
● Minimum pulse width for program reactions		1 µs, 5 µs, 10 µs, 15 µs, 20 µs, 50 µs, 1,6 ms
for standard inputs
— at “0” to “1”, max.		3 µs; typ. 1.5 µs
Cable length
● shielded, max.		600 m
● unshielded, max.		100 m; Shielded cable recommended if filtering delay is set to less than 1.6 ms
Digital outputs
Number of digital outputs		8
Current-sinking		No
Current-sourcing		Yes
Short-circuit protection		Yes; Overvoltage protection, thermal protection
● Response threshold, typ.		1.7 to 3.5 A
Limitation of inductive shutdown voltage to		2M -45 V typ., (-40 V to -55 V); comment: no protection against inductive kickback >55 mJ
Controlling a digital input		Yes
Switching capacity of the outputs
● on lamp load, max.		5 W
Output voltage
● Rated value (DC)		24 V
● for signal “0”, max.		28.8 V
● for signal “1”, max.		0.5 V
Output current
● for signal “1” rated value		0.5 A; At 60 °C
● for signal “1” permissible range for 0 to 60 °C, min.		5 mA
● for signal “1” permissible range for 0 to 60 °C, max.		600 mA
● for signal “0” residual current, max.		1 mA
Output delay with resistive load
● “0” to “1”, max.		1 µs; 0.6 µs 50 mA / 1.0 µs 0.5 A
● “1” to “0”, max.		1.5 µs; 1.7 µs 50 mA / 1.5 µs 0.5 A
Parallel switching of two outputs
● for uprating		Yes; 2
Switching frequency
● with resistive load, max.		100 kHz; 20 kHz at 0.5 A; 100 kHz at 0.25 A
● with inductive load, max.		2 Hz; 2 Hz at 0.5 A with external commutator diodes; 0.5 Hz at 0.5 A without external commutator diodes
● on lamp load, max.		10 Hz
Cable length
● shielded, max.		600 m
● unshielded, max.		100 m
Encoder
Connectable encoders
● Incremental encoder (symmetrical)		Yes
● Incremental encoder (asymmetrical)		Yes
● Absolute encoder (SSI)		Yes
● 2-wire sensor		Yes
— permissible quiescent current (2-wire sensor), max.		1.5 mA
Encoder signals, incremental encoder (symmetrical)
● Trace mark signals		A, notA, B, notB
● Zero mark signal		N, notN
● Input voltage		5 V difference signal (phys. RS 422)
● Input frequency, max.		500 kHz
● Cable length, shielded, max.		100 m; 100 m with 24 V supply and 500 kHz; 32 m with 5 V supply and 500 kHz
Encoder signals, incremental encoder (asymmetrical)
● Trace mark signals		A, B
● Zero mark signal		N
● Input voltage		24 V
● Input frequency, max.		200 kHz
● Cable length, shielded, max.		50 m; Cable length, HTL incremental encoder, Siemens, type 6FX2001-4: 50 kHz, 25 m shielded, max., 25 kHz, 50 m shielded, max.
Encoder signals, absolute encoder (SSI)
● Data signal		DATA, notDATA
● Clock signal		CK, notCK
● Telegram length, parameterizable		13 or 25 bit
● Clock frequency, max.		1 MHz; 125 kHz, 250 kHz, 500 kHz or 1 MHz
● Cable length, shielded, max.		320 m; At 125 kHz
● Monoflop time		settable: 16/32/48/64 µs
● Listening mode		Yes; one or two stations
● Multiturn		Yes; 25 bit message frame
Encoder signal evaluation
● Counting direction, forward		Yes
● Counting direction, backward		Yes
Response times
Input- to output response time		5 V input to 24 V output, 0 filter: 1 to 4 µs (typ.); 24 V input to 24 V output, 0 filter: 2 to 6 µs (typ.)
Interfaces
Point-to-point connection
● Updating times		PLC interface: 1.7 ms
Interrupts/diagnostics/status information
Alarms
● Diagnostic alarm		Yes; 1L, 2L, 3L missing; MMC error; output overload (8); encoder supply overload; differential wire break; parameterization errror; SSI message frame overflow
● Hardware interrupt		Yes; 8 available; for generation by user program
Diagnostic messages
● Wire-break in signal transmitter cable		Yes
● Overflow/underflow		Yes
● missing load voltage		Yes
Diagnostics indication LED
● RUN/STOP LED		Yes
● Module supply 5 V DC (green)		Yes
● I/O status IOF (red)		Yes
● Micro Memory Card error MCF (red)		Yes
● Group error SF (red)		Yes
● Status indicator digital input (green)		Yes; I 0 to I 11
● Status indicator digital output (green)		Yes; Q 0 to Q 7
● Overload encoder supply voltage 24 V F (red)		Yes
● Overload encoder supply voltage 5 V F (red)		Yes
Counter
Counting range, description		Counting range (16-bit counters): -32 768 to 32 767 (user-specific within this range); counting range (32-bit counters): -2 147 483 648 to 2 147 483 647 (user-specific within this range)
Counting range, lower limit		-2 147 483 648
Counting range, upper limit		2 147 483 647
Counting mode
● Counting mode, individual		Yes
● Counting mode, continuous		Yes
● Counting mode, periodic		Yes
Potential separation
between 1L and 2L and 3L		Yes
Potential separation digital inputs
● Potential separation digital inputs		Yes; Yes CPU, I/O and sensor units are isolated
Ambient conditions
Ambient temperature during operation
● min.		0 °C
● max.		60 °C
Ambient temperature during storage/transportation
● min.		-40 °C
● max.		70 °C
Configuration
Programming
● Program cycle time (scan)		1 µs
Connection method
required front connector		1x 40-pin
Dimensions
Width		80 mm
Height		125 mm
Depth		120 mm
Weights
Weight, approx.		434 g; Module weight: approx. 434 g (with 1L connection and without I/O connection or MMC); shipping weight: approx. 500 g (with bus and 1L connection and without I/O connection or MMC)
last modified:		05/28/2020